PUREX INDUSTRIAL -- F-2660, FRANKLIN BIG BOSS  -- 7930-00N031197
<pre>=====================  Product Identification  =====================

Product ID:F-2660, FRANKLIN BIG BOSS
MSDS Date:11/01/1986
FSC:7930
NIIN:00N031197
=== Responsible Party ===
Company Name:PUREX INDUSTRIAL
Address:7300 BOLSA AVE
City:WESTMINSTER
State:CA
ZIP:92684-3600
Country:US
Info Phone Num:714-890-3600
Emergency Phone Num:614-387-6200
CAGE:PUREX
=== Contractor Identification ===
Company Name:PUREX INDUSTRIAL
Address:7300 BOLSA AVE.
City:WESTMINSTER
State:CA
ZIP:92684-3600
Phone:(714) 890-3600
CAGE:PUREX
Company Name:TURCO PRODUCTS, INC.
Address:7300 BOLSA AVE
Box:6200
City:WESTMINSTER
State:CA
ZIP:92684-3600
Country:US
Phone:614-387-6200
CAGE:0BYN5

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHANOL, 2-BUTOXY-; (2-BUTOXY-1-ETHANOL)
CAS:111-76-2
RTECS #:KJ8575000
Fraction by Wt: < 10%
OSHA PEL:S, 50 PPM
ACGIH TLV:S, 25 PPM; 9293

Ingred Name:SODIUM METASILICATE, PENTAHYDRATE; (SODIUM METASILICATE)
CAS:10213-79-3
Fraction by Wt: < 5%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN: SLIGHT IRRITANT. SKIN
    ABSORP: CAN PENETRATE SKIN. FREQUENT PROLONGED OR WIDESPREAD
    CONTACT MAY RESULT IN ABSORPTION OR POTENTIALLY HARMFUL AMOUNTS.
    INHAL: EXTREMELY HIGH CONCENTRATIONS OR FI NE SPRAYS MAY BE
    IRRITATING TO THE EYESAND RESPIRATORY TRACT. INGEST: SLIGHT TO
    MODERATELY TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:ANIMALS STUDIES HAVE CLEARLY DEMONSTRATED
    DOSE-RELATED ADVERSE EFFECTS ON THE CNS, HEMATOPOIETIC TISSUE,
    BLOOD, KIDNEYS, & LIVER ASSOCIATED WITH THE ADMINISTRATION OF
    ETHYLENE GLYCOL MONOBUTYL ETHER ( EGBE) & ETHYLENE GLYCOL MONOBUTYL
    ETHERACETATE (EGEA). (EXTRACTED FROM DHHS (NIOSH) PUBLICATION
    NO.90-118) .
Medical Cond Aggravated by Exposure:NO DATA FOUND.

=======================  First Aid Measures  =======================

First Aid:EYE: IMMEDIATELY FLUSH WITH WATER FOR AT LEAST 15 MIN. GET
    MEDICAL ATTENTION. SKIN: FLUSH WITH WATER. REMOVE ANY
    CONTAMINATED/WETTED CLOTHING. INHAL: REMOVE TO FRESH AIR. INGEST:
    GIVE TWO GLASSES OF W ATER OR MILK. CALL A PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:NONE
Extinguishing Media:CO2, FOAM
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

==================  Accidental Release Measures  ==================

Spill Release Procedures:DIKE AREA IF SPILLAGE IS LARGE. FLUSH WITH
    WATER INTO WASTE TREATMENT SYSTEM.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NORMAL HANDLING PROCESSES; INSIDE
    STORAGE AT 40-100F RECOMMENDED.
Other Precautions:ADD CAREFULLY TO WATER TO AVOID SPLASHING ON SELF OR
    CLOTHING.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
    APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:NORMAL VENTILATION MEANS.
Protective Gloves:RUBBER OR SOFT PLASTIC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:USE ADEQ WASHING FACILITIES. WASH HANDS/OTHER
    CNTCT AREAS THORO. CHANGE CLTHG IF WETTED W/PROD. DO NOT REUSE
    (SUPP DATA)
Supplemental Safety and Health
PH: 12.8-13.2. HYGIENE PRAC: CLOTHING WETTED WITH PRODUCT BEFORE
    CLOTHING IS LAUNDERED.

==================  Physical/Chemical Properties  ==================

HCC:C2
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.0
pH:SUPDAT
Evaporation Rate &amp; Reference:1 (WATER=1)
Solubility in Water:100 %
Appearance and Odor:LAVENDER LIQUID, SASSAFRAS ODOR.
Percent Volatiles by Volume:92

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE

====================  Disposal Considerations  ====================

Waste Disposal Methods:FLUSH WITH WATER INTO WASTE TREATMENT SYSTEM
    AND/ OR IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.